I have some questions about the drawing of the product we were talking about the other day. The diameter of this hole on the front view is different from the one here on the side view. Which is the correct one?
關于前些天說到的產品圖紙，我有幾個問題。正面圖上這個孔的直徑和側面圖上的尺寸不同。哪個是正確的？
Cindy
The side view one is correct. This drawing from the front view might be done before it was fixed. You should check the plan for any mistakes. Also the length of this solid part seems to be wrong.
側面圖上的是正確的。正面圖好像是修改前的圖紙。最好也檢查一下平面圖上有沒有錯誤吧。這個立體部分的邊的長度好像也不對。
王工
I should check the CAD data too.
The production of the part will start soon so I need to fix it immediately.
CAD數據也檢查一下比較好呢。
趕緊改過來，不然部件就要開始制作了。

返回目錄